Deity V-Mic D3 Microphone ไมค์ติดกล้องแบบช๊อตกัน สำหรับถ่ายวิดีโอ, Youtuber หรืองานบันทึกเสียงต่างๆ วงจรภายในออกแบบพิเศษตรวจจับการเชื่อมต่อโดยอัตโนมัติผ่านแจ็ค 3.5 มม. รองรับกล้อง DSLR, Mirrorless, โทรศัพท์มือถือ หรือเครื่องบันทึกเสียง มาพร้อม Rycote ที่ติดฮอทชูกล้องกันสั่น และสาย 3.5mm TRRS

 

Features

• Ideal for On-Camera Applications
• Minimal Off-Axis Coloration
• Low Noise & Distortion
• Supercardioid Polar Pattern
• 50 Hz to 20 kHz Frequency Range
• Battery Powered, Auto Battery Save
• Auto-Configuring 3.5mm TRRS Connector
• Lightweight Aluminum Body
• Low-Reflection Finish
• Includes Shockmount, Cable & Windscreen

 

The Deity Microphones V-Mic D3 is a supercardioid on-camera shotgun microphone offering directional audio capture and broad device compatibility for videographers, YouTubers, and sound recordists. With a built-in microprocessor that automatically configures its TRRS connector to work with most 3.5mm mic input jacks, the V-Mic D3 is compatible with a variety of DSLRs, camcorders, mobile devices, and portable audio recorders. Setup with your camera is simple and efficient using the supplied Rycote adjustable hot-shoe shockmount and 3.5mm TRRS coiled cable.

The pre-polarized condenser capsule utilizes a supercardioid polar pattern, which yields low off-axis coloration and high SPL handling. Boasting a 50 Hz to 20 kHz frequency range with low noise and distortion, the V-Mic D3 adheres to the demanding standards of high-resolution recording. The microphone may be powered via a single AAA alkaline, NiMH, or lithium battery; automatic power saving conserves battery life by entering standby mode when your camera or device is turned off.

The lightweight aluminum body is finished in a low-reflection paint, ensuring that it won't weigh down your camera or induce distracting glare. The V-Mic D3 includes a foam windscreen to minimize noise from wind or HVAC systems.

 

Auto-Configuring 3.5mm Connector

The V-Mic D3 incorporates a microprocessor that automatically adapts its 3.5mm TRRS connector to work with most 3.5mm microphone jacks. Out of the box, the V-Mic D3 is compatible with DSLRs, camcorders, smartphones and tablets (late-model iOS devices require Apple's Lightning to 3.5mm headphone jack adapter), portable audio recorders, bodypack transmitters, and laptops.

 

Low Off-Axis Coloration

The V-Mic D3's pickup pattern remains similar across essential frequencies, yielding low off-axis coloration. Novice and experienced videographers can capture consistent audio quality when dealing with sources that vary their positions.

 

Low-Noise Electronics

Thanks to the 14mm condenser capsule and low-noise, low-distortion electronics, the V-Mic D3 provides clean audio, which means less time spent in post-production processing your tracks with noise-reduction software.

 

Long Battery Life

The V-Mic D3 uses a single AAA battery (alkaline, NiMH rechargeable, or lithium) for power, and features a one-button on/off switch. When turned on, the microphone is ready in standby mode; it automatically goes into run mode when your camera or device turns on. This also allows you to save battery on your microphone when you turn your camera off. A lithium AAA battery provides up to 208 hours of operating time, and over 6300 hours of standby time.

 

Convenient Accessories

The included foam windscreen reduces wind noise and handling noise. The Rycote hot-shoe shockmount minimizes the transfer of vibrations by decoupling the mic from your camera. Connect the V-Mic D3 to your device via the supplied 3.5mm TRRS coiled cable.

 

Specifications

Analog Performance

Sound Field: Mono

Operating Principle: Pressure Gradient

Transducer: Condenser

Diaphragm: 0.55" / 14 mm

Tube: No

Polar Pattern: Supercardioid

Frequency Range: 50 Hz to 20 kHz

Signal to Noise Ratio: 78 dB 

Maximum SPL: 130 dB SPL

Pad: None

THD: < 0.1%

Impedance: 200 Ohms

Sensitivity: -35 dB at 1 kHz

Low-Cut Filter: None

Dynamic Range: 114 dB

General

Output Connectors: 1 x 1/8" (3.5 mm) TRRS

 

Battery Type: 1 x AAA