Tilta MB-T03 4x4" Carbon Fiber Matte box แมทบ็อกซ์บังแสงหน้าเลนส์กล้อง วัสดุคาร์บอนไฟเบอร์ น้ำหนักเบา แข็งแรงทนทาน รองรับเลนส์ได้ถึงขนาด 100 มม. กรอบใส่ฟิลเตอร์ 4x4" สองแผ่น (หมุนได้หนึ่งแผ่น) ติดตั้งเข้ากับท่อ 15 มม. สามารถเปิดออกด้านข้างเพื่อความสะดวกในการเปลี่ยนเลนส์ แผ่นบังแสงด้านบน, ซ้าย และขวา ปรับตำแหน่งได้ตามต้องการ

The Tilta 4x4 Carbon Fiber Matte Box is a 4 x 4 matte box that features carbon fiber and aluminum construction that makes it lightweight and durable. The matte box will work with lenses up to 100 mm in diameter. It features one fixed and one rotating 4 x 4 filter stage and mounts onto lightweight 15mm rods. The matte box incorporates a swing-away design for rapid lens changes.

The included removable top and side flags can be precisely set and locked to block stray light from flaring your lens. The included anti-reflection rings protect your image by blocking stray light behind the camera bouncing off of filters in the matte box and flaring your image.

Lightweight Construction

The matte box itself is made out of carbon fiber with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts.

Swing Away Design

The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out.

Top & Side Flags

The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot.

Anti-Reflection Inserts

The three included anti-reflection inserts work with lenses with an outer diameter of 72, 80, and 90 mm. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image. When you are using lenses with outer diameters other than 72, 80, and 90 mm or with lenses that have excessive focus travel it is recommended to use the cloth "nun's knickers" to prevent light leaks.

Specifications

• Eyebrow Dimensions: 15 1/8” x 4 7/8” (38.41cm x 12.38cm)
• Eyebrow Weight: 5oz
• Side Flag Dimensions: 9 1/8” x 5 1/8” (23.17cm x 13.01cm)
• Side Flag Thickness: 1.5mm
• Side Flag Weight: 3oz
• Maximum Lens OD: 100mm

Included

• 4*4 carbon fiber matte box;
•  Swing away function make it is easy to mount or change your lens;
• It comes with 3 French flags for both sides and top as well as two filter trays (1 fixed and 1 rotatable);
• It can work with lens with diameter of 110mm and below;
•  Includes 15mm rod adapter, It can work with any 15mm standard rig;
• Includes 95mm/80mm lens adaptors;
• 1PC of fabric lens donut included